A note for new visitors...
Please note that this blog is effectively abandoned as of 2009. Visitors are encouraged to visit my new blog (hosted on WordPress.com).
vmlemon's posterous
Test Post from Google Wave to Posterous!
Test Post from Google Wave to Posterous!
Pretty much what the title says...
Pretty much what the title says...
Internal Audio Chipset Info (From ALSA)
Output of cat /proc/asound/card0/codec#0 > HPInternalAudio.txt:
Codec: Conexant CX20561 (Hermosa)
Address: 0
Vendor Id: 0x14f15051
Subsystem Id: 0x103c360b
Revision Id: 0x100000
Modem Function Group: 0x2
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
Amp-Out vals: [0x4a 0x4a]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
Amp-In vals: [0x44 0x44] [0x44 0x44]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 2
0x1d* 0x17
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
Amp-In vals: [0x44 0x44]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x16 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x081c: OUT HP Detect
Pin Default 0x01214040: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=37, enabled=1
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x17 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x081224: IN Detect
Vref caps: 50 80
Pin Default 0x97a70120: [Fixed] Mic at Int Riser
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=38, enabled=1
Power: setting=D0, actual=D0
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x081224: IN Detect
Vref caps: 50 80
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=39, enabled=1
Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x0810010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1b [Pin Complex] wcaps 0x400500: Mono
Pincap 0x0810010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x1d [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x0820: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant CX20561 (Hermosa)
Address: 0
Vendor Id: 0x14f15051
Subsystem Id: 0x103c360b
Revision Id: 0x100000
Modem Function Group: 0x2
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
Amp-Out vals: [0x4a 0x4a]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
Amp-In vals: [0x44 0x44] [0x44 0x44]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 2
0x1d* 0x17
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
Amp-In vals: [0x44 0x44]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x16 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x081c: OUT HP Detect
Pin Default 0x01214040: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=37, enabled=1
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x17 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x081224: IN Detect
Vref caps: 50 80
Pin Default 0x97a70120: [Fixed] Mic at Int Riser
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=38, enabled=1
Power: setting=D0, actual=D0
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x081224: IN Detect
Vref caps: 50 80
Pin Default 0x01a19030: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=39, enabled=1
Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x0810010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x92170110: [Fixed] Speaker at Int Front
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1b [Pin Complex] wcaps 0x400500: Mono
Pincap 0x0810010: OUT EAPD
EAPD 0x2: EAPD
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x1d [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-In vals: [0x03 0x03]
Pincap 0x0820: IN
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Intel GMA915 Graphics Chipset
Output of lspci -s 00:02.0 -vv -nn:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 50000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4199
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915 Output of sudo lspci -s 00:02.1 -vv -nn:
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 52500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 50000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4199
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915 Output of sudo lspci -s 00:02.1 -vv -nn:
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:360b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 52500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Testing posting to FriendFeed using Posterous
Pretty much what the title says...
Experimentation with ACPI Tables...
sudo cp /proc/acpi/dsdt Compaq_CQ60-111EM.dat will produce a 40KB file containing raw ACPI tables. sudo iasl -g on the other hand, fails with: Intel ACPI Component Architecture
ASL Optimizing Compiler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0a Could not obtain RSDT
Could not get ACPI tables, AE_NO_ACPI_TABLES
Running iasl -d Compaq_CQ60-111EM.dat returns:
Intel ACPI Component Architecture
AML Disassembler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0aLoading Acpi table from file Compaq_CQ60-111EM.dat
Acpi table [DSDT] successfully installed and loaded
Pass 1 parse of [DSDT]
Pass 2 parse of [DSDT]
Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Parsing completed
Disassembly completed, written to "Compaq_CQ60-111EM.dsl"
Result of file Compaq_CQ60-111EM.*:
Compaq_CQ60-111EM.dat: data
Compaq_CQ60-111EM.dsl: ASCII C program text Running iasl Compaq_CQ60-111EM.dsl results in success, which is rare for most modern x86 systems:Intel ACPI Component Architecture
ASL Optimizing Compiler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0aCompaq_CQ60-111EM.dsl 6237: Return (Package (0x00) {})
Remark 5071 - Effective AML package length is zero ^Compaq_CQ60-111EM.dsl 6241: Return (Package (0x00) {})
Remark 5071 - Effective AML package length is zero ^ASL Input: Compaq_CQ60-111EM.dsl - 9584 lines, 347136 bytes, 4021 keywords
AML Output: Compaq_CQ60-111EM.aml - 40327 bytes, 759 named objects, 3262 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 2 Remarks, 37 Optimizations
A Compaq_CQ60-111EM.aml file is produced as a result.
ASL Optimizing Compiler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0a Could not obtain RSDT
Could not get ACPI tables, AE_NO_ACPI_TABLES
Running iasl -d Compaq_CQ60-111EM.dat returns:
Intel ACPI Component Architecture
AML Disassembler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0aLoading Acpi table from file Compaq_CQ60-111EM.dat
Acpi table [DSDT] successfully installed and loaded
Pass 1 parse of [DSDT]
Pass 2 parse of [DSDT]
Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Parsing completed
Disassembly completed, written to "Compaq_CQ60-111EM.dsl"
Result of file Compaq_CQ60-111EM.*:
Compaq_CQ60-111EM.dat: data
Compaq_CQ60-111EM.dsl: ASCII C program text Running iasl Compaq_CQ60-111EM.dsl results in success, which is rare for most modern x86 systems:Intel ACPI Component Architecture
ASL Optimizing Compiler version 20090123 [Feb 25 2009]
Copyright (C) 2000 - 2009 Intel Corporation
Supports ACPI Specification Revision 3.0aCompaq_CQ60-111EM.dsl 6237: Return (Package (0x00) {})
Remark 5071 - Effective AML package length is zero ^Compaq_CQ60-111EM.dsl 6241: Return (Package (0x00) {})
Remark 5071 - Effective AML package length is zero ^ASL Input: Compaq_CQ60-111EM.dsl - 9584 lines, 347136 bytes, 4021 keywords
AML Output: Compaq_CQ60-111EM.aml - 40327 bytes, 759 named objects, 3262 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 2 Remarks, 37 Optimizations
A Compaq_CQ60-111EM.aml file is produced as a result.
Chameleon v2.0-RC2 r640 ISO
Another Posterous Test Post
Just a test post... 'Nuff said.
Testing Posterous from GMail
This is of sending an e-mail to Posterous!
